T-962 Infrared IC Heater Reflow Oven Soldering Area 180×235mm 800W. Infrared IC Heater T962 is a micro-processor controlled reflow oven, works automatically by micro-computer control. It can satisfy a dissimilarity SMDBAG soldering a request on a PCB assembly. The T962 may be used to automatically re-flow solder to correct bad solder joints, remove/replace bad components and complete small engineering models or prototypes.
Adoption fast infrared radiation and circulation the wind for heat, so the temperature is very accurate and even. Thermal cycle accuracy is maintained by closed loop micro-computer control with infrared heaters, thermocouple and circulating air.
User interface is implemented by way of T962 input keys and an LCD display. Pre-set heating modes are selected by user interaction with thermal cycle progress observed on LCD display.
Perfect variety functions: return soldering, drying, heat preservation, finalize the design, fast cool off etc. It can be use to solder the most smart small part example CHIPSOPPLCCQFPBGA etc; Can be used to the gum of the product solid turn, the circuit board is hot aging, the PCB plank maintains to wait various works. Be applicable to each kind of business enterprise, company extensively develop and the small batch quantity produce a demand. A windowed drawer is designed to hold the work-piece. The faint ness controls a technique and can see the drawer type workbench, make whole soldering process at you of the under surveillance automatic completed.
Adopted a high and dependable design, make what you see gratifying and rest assured. T962 Initial Set-Up and Adjustments. Place the T962 on an appropriate level, insulated work area.
Make Sure the work space is well ventilated (exhaust fans may be necessary). Allow at least 20mm between the T962 and its surroundings for heat protection. Confirm the Work drawer opens and closes smoothly and without obstruction. Locate supplied universal power cord and connect same from rear apron to AC power. Locate and press the power on button, the LCD will light, the T962 will log on.Press "s" button go to main menu page. Press "F4" button, change to English Menu. In the main menu, Press "F3" button selection different temperature wave. Press "F3" button again, can see parameter about you choose the temperature wave: soldering paster sort. Press "F4" button to return previous page, Press the temperature wave that the"F1" key carries out to make selection automatically, The work shuts down automatically after end, warning buzzer is working.
In the main menu page, press " F2"button by handcraft operation. Press "F1" button to start cooling, Press F1/S key again to stop. Press "F2" button to strat heat up, Press F2/S key again to stop. Press the "S"button selection operation interface after switch on, press the "F4" selections a different language category. Process to request to set the wave comparison according to you to provide you with the reference.
Press the F1/F2 choices different wave, there have 8 kinds of different temperature waves can provide you with the choice, press F3 to look into different wave parameter, press 4 confirm wave. Wave one, use the same with 85Sn/15Pb 70 Sn/30Pb. Wave two, use the same with 63Sn/37Pb 60 Sn/40Pb. Wave three, use the same with Sn/Ag3.5; Sn/Cu 75 Sn/Ag4.0/Cu. Wave four, use the same with Sn/Ag2.5/Cu.Wave five, use the same with The red gum standard is solid to turn temperature wave, Heraeus PD955M. Press "s" button to the temperature page. Press F1/F2 button, ahead/ backwards select different time.
Press F3/F4 button , up/down to select different temperature, Press "s" button to save. When save finish , press F4 button to select the temperature wave. Press S button to repetition.
The product that will process lightly puts into the even on the stage in the drawer, Close drawer, Press F1 to switch on, The automatic performance make selection of heat wave, Show current performance time, the enactment temperature and measure temperature on the LCD screen, and the automatic formation order form wave. Observed the data, wave of the window and the LCD screen manifestation before passing drawer, in the whole supervision that processed all of process and can see at you, if the request for processing wave to could not reach you can modification parameter. Process the wave is strict to press the different tin syrup different temperature to have pre-established request to the return solder , you can prepare to establish another wave according to the different need. Process process in, if need stop, can press "S" to carry on to terminate compulsory;After put the last hand, the breeze machine auto carries on cooling to the product;You can also start the breeze machine to carry on cooling compulsory. After returning solder completion, If the product existence blemish.Can solder again, Can also move the start heating to carry on returning to solder. This machine establishes this function.
The this aircraft for satisfies without the lead double-sided welding, the design has the unique air flue, for the guarantee platelet welding request, suggested when the welding platelet and BGA plant the tin ball, pulls out the base in the material to put in advance one 10x10cm PCB board, may cause the welding quality to be better. The ambient temperature is low when, the humidity or the humidity too are big, suggested before the welding wants preheating the machine. The this aircraft cannot weld the counter-optical too strong metal seal chip and the metal screening can; May not weld the withstanding temperature to be lower than 250 degree plastic plug-in units and the goods, asks respectfully the attention!
Customer examination machine temperature method: Uses the standard thermometer, outside will set at the temperature probe head fixedly 10x10cm PCB stiff surface, shuts tight certainly importantly in the PCB board above! Will fix has the temperature measurement probe head PCB board, puts in the material to pull out, thrusts in the machine, like this tests the temperature comparison conforms to the product production actual situation. Periodically sweep the observation bore glass of the drawer, keep it to sweep. After use, Don't at once close the power, make sure the machine cooling.
Assure well ventilated of the machina. Disconnect the plug when you don't use the it for a long time.
Don't open the machine , take care carefully to use. Self-contained Micro-Processor controlled IC Heater and solder rework station. Uses up to 800 watts of energy efficient Infrared heating and air circulation to re-flow solder in a large 180×235mm area. Memory eight kinds of temperature parameter waves can be provided as choice, and establish to move heating and cool off function compulsory. Adoption fast infrared radiation and circulation the wind for heat makes the temperature very accurate and even.
The entire soldering process is completes automatically from Preheat, Soak and Reflow through cool- down. Complete visual operation by the high quality LCD screen. Soldering cycles are keypad selected and progress displayed on the T962 LCD. Can be used for the glue solidifying, circuit board thermal aging, PCB maintenance, etc.
Can solder single and double PCB panels with all kinds of encapsulation form such as CHIP, SOP, PLCC, QFP, BGA, etc. A single windowed drawer holds assemblies within the heating chamber. Equiped with exhaust fan to satisfy the need of the soldering. Economical rework solution from single runs to on-demand small batch production. High-frequency design is ergonomic, practical and easily operated.The Curve storage Capacity machine. 1 X T-962 Main Heater Infrared Oven. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage.
Used items will not be accepted for return. All emails will be responded to within. You want to cancel an order. If you need further assembly instructions for a product.Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault.
A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item "T-962 Infrared IC Heater Automatic Reflow Oven Soldering Area 180 x 235mm 800W" is in sale since Thursday, December 6, 2018.This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Soldering & Desoldering\Soldering Irons". The seller is "m18595638214-4" and is located in Ontario, California. This item can be shipped worldwide.