Vacuum Desoldering Rework Station Digital Temperature Controlled Dual LCD ZD-985

Vacuum Desoldering Rework Station Digital Temperature Controlled Dual LCD ZD-985
Vacuum Desoldering Rework Station Digital Temperature Controlled Dual LCD ZD-985

Vacuum Desoldering Rework Station Digital Temperature Controlled Dual LCD ZD-985

This temperature controlled desoldering station makes desoldering of through-hole parts a breeze. Simply place the heated tip of the gun over the pin to be de-soldered, wait for the solder to melt, then press the trigger.

This will activate the vacuum pump in the station to suck the melted solder through the hollow tip into a waste reservoir and leave the component's leg and PCB free of solder. It only takes a few seconds per pin. If you've ever tried to de-solder parts using wick or a manual vacuum pump, you know how difficult that is, particularly on a double-sided board. You will NOT have these problems using our desoldering station, because it sucks the solder from both sides of the board, leaving the hole and component leg virtually free of solder. The station has a dual LCD display, showing the desired temperature and the actual temperature. The display can be switched from Fahrenheit to Celsius if, and the desired temperature can be dialed-in using the up/down buttons. An illuminated power on/off switch is also located on the front. The side of the station features a typical holder, with sponge. Two lines (power and vacuum, both can be disconnected) connect the station to the gun. There is a filter at the station-side of the vacuum connector, and another filter in the gun itself. The package comes with the following items: 1. Temperature Controlled Station, with AC Power Cord (ZD-985) 2. Vacuum Desoldering Gun (80-552A) 3.

Three tips with different sized holes (0.8mm = N5-1, 1mm = N5-2, 1.3mm = N5-3) 4. Three cleaning rods (these are used to clean the hole in the tips when necessary) 5. SPARE PARTS & CONSUMABLES: Spare parts and consumables (such as additional tips, filters, cleaning rods, heater elements) are available separately or in the SOLACC552 accessory kit.

The item "Vacuum Desoldering Rework Station Digital Temperature Controlled Dual LCD ZD-985" is in sale since Sunday, March 24, 2019. This item is in the category "Home & Garden\Tools & Workshop Equipment\Power Tools\Welding & Soldering Tools". The seller is "memotronics_llc" and is located in Nash, Texas. This item can be shipped worldwide.


Vacuum Desoldering Rework Station Digital Temperature Controlled Dual LCD ZD-985